Anybus Bolt

Wireless

Industrial wireless access for machines via Bluetooth and WLAN

The Wireless Bolt is an All in one solution device that’s both flexible and mobile. Plug it in and BYOD either via Bluetooth or Wireless LAN (WLAN). 

Fits harsh environments

Anybus Wireless Bolt has a unique form factor with it’s through hole mounting method. This fits the harsh environment often found in Factory Automation.

BYOD

Bring Your Own Device phone/tablet/pc. Bolt is easy to Use via Bluetooth or Wireless LAN connection.

Bluetooth or Wi-Fi

Anybus Wireless Bolt Serial enables you to connect industrial machines and devices to a wireless network with Bluetooth or Wi-Fi.

Low Power technologies

Need an Internet connection for your remote equipment? Bolt IoT provides a cheap industrial Low Power Wide Area connection using the LTE technologies CAT-M1 and NB-IoT with 2G fallback.

Low Power and Low Bandwidth

Bolt IoT gives Low Power consumption, Low Bandwidth (25-300 kbit/s), Good geographical coverage and Lower Cost.

M50

Intuitive and interesting form-factor; M50 through-hole mount on any flat surface

Anybus Wireless Bolt IoT

The Anybus Wireless Bolt IoT gives devices, machines and equipment an Internet connection. This solution uses the latest LTE standards NB-IoT and CAT-M1 and fits both stationary and mobile equipment. These new LTE standards are so called LP-WAN technologies (Low Power Wide Area Network) adapted for the new IoT use cases. This means Low Power consumption, Low Bandwidth (25-300 kbit/s), Good geographical coverage and Lower Cost. 

The innovative hardware form-factor with its M50 throughhole mount enables effective access to good cellular connectivity, without losing coverage due to long and lossy antenna cable. The Bolt IoT is up-to-date with the latest 4G LTE standards NB-IoT and CAT-M1 and, to be globally effective, it uses 2G (GPRS/EDGE) fallback enabling deployment almost anywhere in the world.

Anybus Wireless Bolt - Ethernet 18-pin

The Anybus Wireless Bolt IoT gives devices, machines and equipment an Internet connection. This solution uses the latest LTE standards NB-IoT and CAT-M1 and fits both stationary and mobile equipment. These new LTE standards are so called LP-WAN technologies (Low Power Wide Area Network) adapted for the new IoT use cases. This means Low Power consumption, Low Bandwidth (25-300 kbit/s), Good geographical coverage and Lower Cost. 

The innovative hardware form-factor with its M50 throughhole mount enables effective access to good cellular connectivity, without losing coverage due to long and lossy antenna cable. The Bolt IoT is up-to-date with the latest 4G LTE standards NB-IoT and CAT-M1 and, to be globally effective, it uses 2G (GPRS/EDGE) fallback enabling deployment almost anywhere in the world.

Anybus Wireless Bolt - Ethernet RJ45 PoE

Anybus Wireless Bolt enables you to connect industrial machines and devices to a wireless network. It is attached onto a cabinet or a machine to enable wireless access over Bluetooth®, Bluetooth Low Energy® or Wireless LAN (WiFi).

On the wired side, the Anybus Wireless Bolt communicates over Industrial Ethernet, supporting protocols such as BACnet/IP, PROFINET, EtherNet/IP, Modbus TCP as well as all TCP and UDP based protocols.

Anybus Wireless Bolt Serial

Anybus Wireless Bolt Serial enables you to connect industrial machines and devices to a wireless network. It is attached onto a cabinet or a machine to enable wireless access over Bluetooth®, or WiFi (Wireless LAN). It converts serial RS232/RS485 data to TCP/IP communication over the wireless link. It also works as a router for Modbus-TCP to Modbus-RTU enabling transparent access to all your existing serial Modbus devices.

With Anybus Wireless Bolt you get an All-in-one package featuring, connector, communication processor and integrated antenna in the same unit, with an industrial IP66/IP67 protection class.

Anybus Bolt

If you want to learn more about the Wireless Bolt, check out the video where we talk more about the Bolt and what it’s capable of.